OEM Factory for Copper Wire Peeling Machine - Copper Polisher – DongYun

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for China Laser Engrving Machine , Mini Grinder , Laser Cleaning Machine For Rust Removal , We are going to empower people by communicating and listening, Setting an example to others and learning from experience.
OEM Factory for Copper Wire Peeling Machine - Copper Polisher – DongYun Detail:

Main Features:
High efficiency:Operating module control with high integration level makes nearly all the operation in this heart.
Long life-span:Strengthening seal main machine bed ensures the intensity of the whole equipment and the machine bed against transmogrification.
The rotate speed of cylinder and rubber wheel is adjustable.
The special vertical dusting structure makes the dusting affect better,its floor space smaller and your working environment cleaner.
The guide rail of the polisher-head is with dusting process to prevent dust from entering the inside of guide rail and affecting the precision.
The surface of the polished cylinder looks as shining as mirror.

Machine model L1300 L1700 L2100
Capacity of cylinder length 300-1300mm 300-1700mm 300-2100mm
Capacity of cylinder Diameter 90-400mm 90-400mm 90-400mm

The next process after copper grinding is copper polishing. This machine can make the copper roller brighter and remove the burr on the surface of copper layer. This machine occupies a small area, has a high degree of automation and stable performance.

The key to the operation of the polishing machine is to get the maximum polishing rate so as to remove the damaged layer as soon as possible. At the same time, the polishing damage layer will not affect the final observed structure, that is, it will not cause false structure. The former requires the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polishing damage layer is also deeper; the latter requires the use of the finest material, so that the polishing damage layer is shallow, but the polishing rate is low.

The best way to solve this contradiction is to divide polishing into two stages. The purpose of rough polishing is to remove the surface damage caused by rough polishing, which should have the maximum polishing rate. The surface damage formed by rough polishing is a secondary consideration, but it should also be as small as possible; the second is fine polishing (or final polishing), which aims to remove the surface damage caused by rough polishing and minimize the polishing damage. When polishing by polishing machine, the grinding surface of the sample and the polishing disc should be absolutely parallel and gently pressed on the polishing disc evenly. Attention should be paid to prevent the sample from flying out and producing new grinding marks due to excessive pressure. At the same time, the sample should rotate and move back and forth along the radius of the turntable, so as to avoid the local abrasion of the polished fabric too fast. In the polishing process, the micro powder suspension should be added continuously to keep the polishing fabric keep a certain humidity. If the humidity is too low, the hard phase will be convex and the non-metallic inclusions in the steel and the graphite phase in cast iron will lead to the phenomenon of “trailing tail”; if the humidity is too low, the heat generated by friction will increase the temperature of the sample, reduce the lubrication effect, and even cause the surface to lose luster and even black spots, and the light alloy will scratch the surface. In order to achieve the purpose of rough polishing, it is required that the rotating speed of the rotary table should be low, and it is better not to exceed 600r / min; the polishing time should be longer than the time needed to remove the scratch, because the deformation layer should also be removed. After rough polishing, the grinding surface is smooth but dull, and there are even and fine grinding marks under the microscope, which need to be eliminated by fine polishing.


Product detail pictures:

OEM Factory for Copper Wire Peeling Machine - Copper Polisher – DongYun detail pictures


Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" is the persistent conception of our firm to the long-term to develop together with consumers for mutual reciprocity and mutual advantage for OEM Factory for Copper Wire Peeling Machine - Copper Polisher – DongYun , The product will supply to all over the world, such as: Juventus, Poland, Mexico, We provide OEM services and replacement parts to meet the varying needs of our customers. We give competitive price for quality solutions and we are going to make certain your shipment is handled quickly by our logistics department. We sincerely hope to have the opportunity to meet with you and see how we can help you further your own business.
  • Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Lesley from Turkey - 2017.02.28 14:19
    We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
    5 Stars By Mike from Guatemala - 2018.09.23 17:37
    Write your message here and send it to us